Do you understand the protection function of solvent recovery machine used by enterprises in our daily life? Please follow the solvent recovery machine below small make up to understand it.
1. Temperature setting shutdown function:
Turn the shutdown temperature controller knob to set a temperature as the shutdown temperature. When the recovery is completed, the solvent steam in the steam pipe will gradually reduce, the scale of the steam thermometer will gradually decrease, trigger the shutdown system, the machine will automatically shut down. This function makes the machine stop running completely and plays the role of shutdown.
2. Timed shutdown function:
Set the recovery time of the machine in advance. When the machine starts up and runs for a preset time, the machine will stop automatically. After having this function, can pass proper shorten to reclaim time, make sure to recycle a few solution to reserve inside recycle bucket to make residue is liquid state when recycling is finished, clear conveniently namely, can prevent effectively to burn dry or gas to erupt to give rise to. The timing protection system plays a role in shutting down the whole machine.
3. Ultra-high temperature protection function:
Preset the maximum heating temperature. When the oil temperature reaches the preset maximum temperature, the high temperature protection red light will be on and the heater will stop heating. This function ensures the solvent recovery machine in the set temperature range safe operation, effectively prevent the heating temperature is too high.
4. Ultra high voltage protection function:
If the pipe is blocked, the steam cannot be discharged through the steam pipe and the pressure inside the barrel will rise to 0.38Bar above the external pressure. The safety valve on the cover of the barrel will automatically open to relieve pressure to ensure the safety of equipment and operators.
5. Power failure protection function:
If the power is suddenly cut off during the machine operation, the machine will start the power off protection function and shut down automatically. When the power is supplied again, the power indicator lights up, but the machine does not operate.
6. Lower slag discharge function:
The lower discharge slag function, when the recycling is completed to clean up the residue, do not call the barrel cover, but open the valve, let the residue natural flow out, to avoid cleaning the residue volatile solvent released by the unpleasant smell, more different from the staff's operation.
This article links: